This stylish modern pellet patio heater turns any outdoor space into a warm, cozy spot. The unique design with vertical combustion tube spreads heat through a natural flame. It burns entirely on natural wood pellets and requires no power connection - so you have complete flexibility in where you place it. Enjoy heat for up to 2 hours per fill of quiet, odorless heat, with minimal smoke and low environmental impact.

Material

The patio heater consists of a Corten steel frame, a heat-resistant glass tube and a metal reflector at the top. The base is equipped with wheels on one side for easy moving. The open design provides an efficient draft and powerful, low-smoke combustion.

The fuel used consists of pressed sawdust pellets. Preferably use high-quality ENplus A1 pellets for nearly carbon-neutral combustion, high heat output and minimal ash formation.

Method of operation

1:Make sure the pellet patio heater is on a flat surface and perfectly plumb. Fill the pellet tank with compressed sawdust pellets.

2: Apply a small amount of vegetable fuel on top of the pellets.

3: Open the air damper (damper).

4: Use a long lighter to light the pellets (±2 min lighting until stable flame).

5: Because of the natural process, it is not possible to stop the process prematurely. af - the pellets should burn up completely within a cycle of ± 2 hours. However, it is possible to refill the heater while the pellets are burning.

Caution: the glass tube and metal parts become hot during use. Never open the combustion chamber during combustion or cooling.

Cleaning and maintenance

After each use: Let the appliance cool down completely. Remove the glass tube and clean the fire chamber with a brush. If necessary, remove ash residue from the bottom holes and firepot with a wire brush or plunger. Regular maintenance extends its life and ensures safe operation.

Periodically: Clean the glass tube with a soft cloth and special glass cleaner. Check the air supply for blockages.