How do you install a water table?
A water table is a beautiful addition to your garden or terrace. The sound of flowing water creates a relaxing atmosphere. To truly enjoy it, it is important to install the water table correctly. This way, you prevent having to quickly repair or replace parts. Your water table will also remain beautiful for longer.
In this blog, we explain step by step how to install a water table yourself and what to watch out for.
Summary
- With proper preparation, you can easily install a water table yourself.
- Ensure a flat, stable surface for the water table to stand securely.
- Choose a location close to power and water outlets to easily connect the pump and lighting.
- Pay attention to the pH level of the water to prevent rust on your water table.
Can you install a water table yourself or do you need a professional?
If you prepare well, you can easily install a water table yourself. The water table comes with everything you need, such as a pump and a cord. You only need to place the ornament, connect the pump, and fill the reservoir with water.
Just make sure that the surface where you place the water table is flat and firm. This way, the water table will stand straight.
What do you need to install a water table?
A successful installation begins with good preparation and the right materials. Make sure you have all the necessary tools on hand and that the connections are in order. This way, you avoid problems and ensure that you can place the steel water table stably and safely.
What tools do you need for the installation?
For the installation of your water table, you will need the following:
- Level: This ensures that the water table is level.
- Tools such as a shovel or rake: This will help you to even out the surface.
- pH meter: To measure the pH level of the water, preventing damage to the aluminum water table and preventing a corten steel water table from rusting.
What connections do you need for a steel water table?
You will also need a few connections to make your water table work properly. Consider the following:
- Power supply: For the pump and any lighting. The water table comes with a plug that you can easily plug into the socket.
- Water connection: Although you can fill your water table by hand, it is handy to have a water connection nearby.
What is the best location for a steel water table?
The right location for your steel water table is important. Consider the following factors:
- Flat, sturdy surface: Choose a stable surface such as tiles or concrete. Do you want to place the water ornament in the sand? Then make sure the sand is well tamped down and that the water table is level. This prevents the water table from sinking.
- Close to power and water points: Place the water table near a power and water connection. This way, you won't have to use extension cords.
- Distance from trees and plants: Set the water table outside in a location where no leaves or branches can fall into it, so that the pump does not become clogged.
Tree roots
Do not place the water table on or next to rising roots of large trees. These roots can lift the water table over time, causing it to no longer be level.
How to mount a steel water table?
Have you found the perfect spot for your water table? Then it's time to install the table. Immediately remove the packaging upon receipt. This prevents stains or damage. After that, follow the steps below to ensure that the water table is placed securely and well:
Prepare the surface properly
Before you start installing, you need to prepare the surface well:
Level the ground: Use a shovel or rake to make the ground as level as possible. This ensures that the water table can stand stably.
Check the stability: A stable surface prevents stress in your water table, which can cause cracks or damage.
Place and connect the water table
Once the surface is ready, you can place the water table:
● Place the water table: Set the water table in the correct position and check with a level that it stands straight.
● Connect the pump of your water table: Plug the pump into the socket and ensure that the cables are safely and neatly tucked away.
Fill the reservoir with water
Now you can fill the reservoir:
● Fill the reservoir: Fill the reservoir until the pump is fully submerged.
● Monitor the pH level: Use a pH meter to keep the pH level of the water at a neutral level (7). This prevents damage to the material of the water table.
Conclusion
Installing a water table is a task that you can easily do yourself. Ensure a flat surface, connect the pump, fill the reservoir with water, and enjoy your new decoration. If you are well-prepared and use the right tools, you will have a beautiful, functioning water table in your garden in no time. Don't forget to perform regular maintenance so that your water table continues to work well.
Reading tip
Want to know more about maintaining water tables? Read our blog on maintaining a water table.
